Club Car Carryall 300 2021, Maintenance And Service Manual

Page: 448 / 596

23
Driven Clutch GASOLINE VEHICLE - CLUTCHES
4. Slide the threaded bolt assembly through the clutch body until the threaded bolt and thrust collar are against
the fixed sheave.
5. Install the cam press plate (5), thrust washer (6), thrust bearing (7), thrust washer (8), and nut (9) onto the
threaded bolt.
6. Thread the nut down onto the cam hub, centering the press hub onto the cam hub.
7. Use two wrenches and hold the threaded bolt head while tightening the cam press plate to press the cam onto the
keyed shaft. Advance the cam press plate until it is firm against the shaft end.
WARNING
• Do not place fingers under the cam when removing the cam. The moveable face may spin when the
cam buttons release from the cam ramps, resulting in severe personal injury.
8. Remove the retaining ring (10) (Figure 23-15, Page 23-14) .
608B
Figure 23-15 Remove Retaining Ring
9. Insert a puller plug (11) into the shaft bore (Figure 23-16, Page 23-15) .
Page 23-14 2021 Carryall 300 Maintenance and Service Manual