Club Car Carryall 300 2021, Maintenance And Service Manual

Page: 388 / 596

19
Battery
GASOLINE VEHICLE - ELECTRICAL
COMPONENTS
LED HEADLIGHT REMOVAL
1. Disconnect the battery.
2. Remove the cowl.
3. Lift the tabs on the connector harness to release the electrical connector from the LED headlight (1) (Figure
19-49, Page 19-42) .
2993E
Figure 19-49 LED Headlight
4. Remove the screws (2).
5. Remove the LED headlight.
LED HEADLIGHT INSTALLATION
1. Install the LED headlight (1) into the headlight bezel (Figure 19-49, Page 19-42) .
2. Install the screws (2). Tighten the screws to 22 in·lb (2.5 N·m).
3. Install the electrical connector onto the LED headlight.
4. Connect the battery.
5. Install the cowl.
BATTERY
DANGER
• Due to the danger of an exploding battery, wear a full face shield and rubber gloves when working
on or near batteries.
• Battery – Explosive gases! Do not smoke. Keep sparks and flames away from the vehicle and service
area. Ventilate when charging or operating vehicle in an enclosed area. Wear a full face shield and
rubber gloves when working on or near batteries.
• Tools, wires, and metal objects can cause sparks when shorted across a battery.
• Follow all instructions carefully when working with batteries.
• Charge battery in a well-ventilated area only.
DANGER CONTINUED ON NEXT PAGE
Page 19-42 2021 Carryall 300 Maintenance and Service Manual