Club Car Carryall 300 2021, Maintenance And Service Manual

Page: 359 / 596

GASOLINE VEHICLE - ELECTRICAL
COMPONENTS Starter/Generator
19
STARTER/GENERATOR INSTALLATION
1. Disable the vehicle.
2. Disconnect the battery and spark plug wire.
3. Install the green wire (1) from the F1 terminal to the A2 terminal on the starter/generator (Figure 19-15) .
3033B
Figure 19-15 Starter/Generator Green Wire
4. Install a flat washer, lock washer, and nut onto each terminal and tighten to 48 in·lb (5.4 N·m).
5. Position the starter/generator over the mounting bracket.
6. Install the pivot bolts (2) and pivot nuts (1) (Figure 19-16, Page 19-13) . Tighten the pivot nuts with your hand.
2997B
Figure 19-16 Starter/Generator Installation
7. Install the adjustment bolt (3), lock washer (4), and nut (5). Tighten the hardware with your hand.
8. Install starter/generator belt (6).
2021 Carryall 300 Maintenance and Service Manual Page 19-13