Canon iR3245, Service Manual

Page: 97 / 746

Chapter 2
2-29
After replacing the AC driver PCB
F-2-114
13) Connect the connector for the cassette heater that is situated near the AC
driver PCB and is connected to the host machine to J482 [1] of the AC
driver PCB.
- 1 edge saddles [2]
- 1 wire saddles [3]
Connect the connector for the DC controller that is situated near the AC
driver PCB and is connected to the host machine to J486 [4] of the AC
driver PCB.
F-2-115
14) Insert the protrusion [2] of the environment switch unit into the host ma-
chine frame hole [1] and install the environment switch unit [4] with the
screw (TP; M3X6) [3].
F-2-116
15) Connect the connector [1] of the environment switch unit to J483 of the
AC driver PCB.
- 1 reuse band [2]
- 1 wire saddles [3]
- 1 edge saddles [4]
F-2-117
16) Install the lower rear cover.
17) Install the upper rear cover.
18) Connect the lattice connector to the host machine.
19) Connect the host machine's power plug to the outlet, and then turn ON
the main power switch.
20) Turn on the environment heater switch.
21) Install the environment heater switch cover.
2.10 Installing the Cassette Heater for the
[2]
[2]
[3]
[3]
[1] [4]
[5]
[2]
[3]
[5]
[5]
[5]
[4]
[5]
[4]
[3]
[1]
[2]
[1]
[2]
[3]
[4]
[1]
[2]
[3]
[4]