Canon iR3245, Service Manual

Page: 646 / 746

Chapter 17
17-148
RUI-RJT 2 Title Setting as to whether to disconnect HTTP port during illegal authentication from remote UI
Purpose of use, When used Disconnect the HTTP port when illegal authentication has occurred 3 times from a remote UI.
Precautions for use -
Settings and adjustment
ranges 0: The HTTP port is not disconnected.
1: The HTTP port is disconnected.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
CTM-S06 2 Title Setting to delete password from the transmission address export file
Purpose of use, When used This item is used when the leakage of information is to be prevented. Set the deletion of the password
from the file transmission address export file.
Precautions for use -
Settings and adjustment
ranges 0: The password is not deleted.
1: The password is deleted.
When '1' is set, the password for the transmission destination is deleted from the export file when the
address book data is exported from the remote UI.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
FREG-SW 2 Title Selection of whether to display MEAP counter (for SEND) free register area
Purpose of use, When used This item is used when trouble is analyzed. Select whether to display the free register area of the
MEAP counter (for SEND).
Precautions for use - This must not be used for regular servicing.
- It must be used in accordance with the instructions given by the Quality Support department.
Settings and adjustment
ranges 0: The free register area is not displayed.
1: The free register area is displayed.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes The MEAP counter has a free register area in which the MEAP applications can be counted up
independently.
IFAX-SZL 2 Title Selection of whether to impose transmission size limits during IFAX transmissions
Purpose of use, When used Enable data whose volume is greater than the upper limit of the transmission data size to be transmitted
in IFAX transmissions which do not go through the server.
Precautions for use -
Settings and adjustment
ranges 0: The transmission size limit is imposed (both when the transmissions go through and do not go
through the server).
1: The transmission size limit is released (but only when the transmissions do not go through the
server).
Error #830 results if data whose volume exceeds the upper limit is transmitted when '0' is set.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 1
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes The upper limit for the transmission data size can be set in the user mode by selecting the following:
system control settings > communication control settings > I-FAX settings > upper limit of
transmission data size
COPIER > OPTION > USER
Item Level Description