Canon iR3245, Service Manual

Page: 41 / 746

Chapter 1
1-13
1.2.3.3 Timer Settings
0018-9672
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
*1: Indicates the default setting.
T-1-5
1.2.3.4 Adjustment/Cleaning
0018-9673
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
*1: Indicates the default setting.
*2: Indicates items that appear only when the appropriate optional equipment is attached.
*4: Indicates items that appear only when the appropriate optional equipment is attached to the imageRUNNER 3230/3225. For the imageRUNNER 3245/3245i/
3235/3235i, these items are displayed by default.
T-1-6
Standard Local Print Settings No
Paper Select All Paper Sources, Auto*1
Copies 1*1 to 9,999 sets
Finishing If No Finisher Is Attached or Only the Optional Inner 2 Way Tray-D1 is Attached:
Do Not Collate, Collate*1, Rotate Collate, Group, Rotate Group
If the Optional Finisher-S1 Is Attached:
Do Not Collate, Collate, Offset Collate*1, Group, Offset Group, Staple (Corner)
If the Optional Finisher-S1 and Puncher Unit-R1 Are Attached:
Do Not Collate, Collate, Offset Collate*1, Group, Offset Group, Staple (Corner), Hole
Punch
If the Optional Finisher-AE1 or Saddle Finisher-AE2, and Buffer Pass Unit-E2 Are
Attached:
Do Not Collate, Collate, Offset Collate*1, Group, Offset Group, Staple (Corner: Top
Left, Bottom Left, Top Right, Bottom Right), (Double: Left, Right)
If the Optional Finisher-AE1 or Saddle Finisher-AE2, and Buffer Pass Unit-E2 and
Puncher Unit-M1 Are Attached:
Do Not Collate, Collate, Offset Collate*1, Group, Offset Group, Staple (Corner: Top
Left, Bottom Left, Top Right, Bottom Right), (Double: Left, Right), Hole Punch
2-Sided Print On, Off*1
Erase Document After Printing On, Off*1
Merge Documents On, Off*1
Language Switch On, Off*1 Yes
Reversed Display (Color) On, Off*1 Yes
Offset Jobs*2 On*1, Off Yes
Job Separator between Jobs On, Off*1 Yes
Job Separator between Copies On, Off*1 No
Job Duration Display Copy: On, Off*1 No
Mail Box: On, Off*1
Other: On, Off*1
Number of Copies/Job Duration Status Display On*1, Off No
Different Paper Sizes for the Output Tray*2 On*1, Off Yes
Cleaning Display for the Original Scanning Area*4 On*1, Off No
Data Compression Ratio for Remote Scans High Ratio, Normal*1, Low Ratio Yes
Gamma Value for Remote Scans Gamma 1.0, Gamma 1.4, Gamma 1.8*1, Gamma 2.2 Yes
Limited Functions Mode*2 On, Off*1 Yes
Shutdown Mode Press [Start] No
Suspended Job timeout On(0 to 999 minutes, in one minute increments, 5minutes*1), Off*1 Yes
Initialize Common Settings Initialize No
Item Settings Delivered
Time Fine Adjustment 00:00 to 23:59, in one minute increments No
Auto Sleep Time 10 seconds, 1*1, 2, 10, 15, 20, 30, 40, 50 min., 1 hour, 90 min., 2, 3, 4 hours Yes
Auto Clear Time 0 (Off) to 9 minutes, in one minute increments; 2 min.*1 Yes
Time Until Unit Quiets Down 0 (Off), to 9 minutes, in one minutes increments; 1 min.*1 Yes
Daily Timer Settings Sunday to Saturday, 00:00 to 23:59, in one minute increments Yes
Item Settings Delivered
Zoom Fine Adjustment X, Y: -1.0% to +1.0%, in 0.1% increments; 0.0%*1 No
Saddle Stitcher Staple Repositioning*2 Press [Start] No
Saddle Stitch Position Adjustment*2 All paper sizes: -2.0 mm to +2.0 mm, in 0.25 mm increments; 0.00 mm*1 Yes
Creep (Displacement) Correction Adjustment Correction (for each paper type) 0.000" to 0.078" (0.00 mm to 2.00 mm), in 0.002" (0.05
mm) increments; 0.010" (0.25 mm)*1 No
Auto Gradation Adjustment Automatic after the machine prints and scans three sets of test prints No
Exposure Recalibration Copy/Inbox, Send: No
Light, Dark: 1 to 9 levels; 5*1
Item Settings Delivered