Canon iR3245, Service Manual

Page: 289 / 746

Chapter 9
9-7
9.4.2 Detecting an Error
0018-9787
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
T-9-3
Error code Detail code Symptom Description
E000 0001 The fixing temperature fails to increase. When each of the following conditions is detected for 200 msec or more continuously, the
machine assumes that an error has occurred.
- A temperature of less than 30 deg C is detected by the fixing thermistor after 1 sec since the
start of power supply.
- A temperature of less than 70 deg C is detected by the fixing thermistor after 2 sec since the
start of power supply.
- A temperature of less than 120 deg C is detected by the fixing thermistor after 6 sec since
the start of power supply.
E001 0000 The fixing main thermistor detects
overheating. The fixing thermistor detects 250 deg C or more for 200 msec or more continuously.
0001 A hardware circuit detects overheating. A hardware circuit detects overheating in relation to the fixing thermistor (main/sub).
0002 The fixing sub thermistor detects
overheating. The fixing thermistor detects 295 deg C or more for 200 msec or more continuously.
E002 0000 The fixing temperature fails to reach a
specific level. In the course of start-up control, the fixing thermistor detects less than 115 deg C for 400 msec
or more continuously after 1.3 sec since it detected 100 deg C. Or, the fixing thermistor
detects less than 150 deg C for 400 msec or more continuously after 1.3 sec since it detected
140 deg C.
E003 0000 The fixing temperature has dropped to an
abnormally low level. In the course of normal temperature control, the fixing thermistor detects less than 140 deg C
for 200 msec or more continuously.
E004 0000 Missing of the thermistor connector Missing of the connector is detected for 30 msec continuously.
E007 0000 The fixing film rotates in an abnormal
way. The reading of the fixing main thermistor is in excess of 100 deg C with the fixing motor in
a locked state and, in addition, the machine fails to detect the marker signal for 6 sec.
E014 0001 The machine detects a fixing motor error.
(The motor is not locked.) The locked status is not detected even when 2 sec elapses after the motor is turned on.
0002 The machine detects a fixing motor error.
(The motor is unlocked.) The motor is unlocked for 500 msec continuously after the locked status is detected.