Canon iR3245, Service Manual

Page: 624 / 746

Chapter 17
17-126
17.6.1.13 COPIER > OPTION > BODY (13/15)
0019-9612
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
SEND-AUT 2 Title Switching of user authentication to use SEND function
Purpose of use, When used This item is used when executing user authentication to use SEND function.
Precautions for use -
Settings and adjustment
ranges 0: The guest button is not displayed. 1: The guest button is displayed.
When this item is set to '1', the guest button is displayed in the MEAP login screen. However, pressing
this button will allow a user who does not use SEND function to login without using an ID and
password.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes After a user logs in using the guest button, SEND function cannot be used.
SJOB-CL 1 Title Switch for enabling scan job cancellation by logout
Purpose of use, When used Cancel scan jobs in operation if logout is initiated.
Precautions for use -
Settings and adjustment
ranges 0: Canceling is disabled. 1: Canceling is enabled.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes - Scan jobs are jobs upon completion of the scanning operation. Scan jobs cannot be canceled while
scanning is underway.
- When the job is canceled, it will be handled in the same manner as cancellation by the user and will
be recorded in communication records.
DHCP-12 2 Title Selecting whether to enable DHCP option 12 requests
Purpose of use, When used This item is used to prevent the inclusion of option 12 and option 81 in the DHCP packets in an
environment where the packets passing over the network are monitored. Enable host name (option 12)
inquiries using option 55 of DHCP.
*DHCP(Dynamic Host Configuration Protocol)
Precautions for use -
Settings and adjustment
ranges 0:OFF
1:ON
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 1
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
DHCP-81 2 Title Selecting whether to enable DHCP option 81 requests
Purpose of use, When used This item is used to prevent the inclusion of option 12 and option 81 in the DHCP packets in an
environment where the packets passing over the network are monitored. Enable the dynamic changes
in the IP addresses made by option 81 of DHCP.
Precautions for use When this item is set to '1' and the dynamic DNS setting of the user mode is set to ON, the dynamic
changes in the IP addresses made by option 81 of DHCP take effect.
Settings and adjustment
ranges 0: OFF
1: ON
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 1
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
COPIER > OPTION > BODY
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level Description