Canon iR3245, Service Manual

Page: 616 / 746

Chapter 17
17-118
17.6.1.9 COPIER > OPTION > BODY (9/15)
0019-9608
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
T-17-58
COPIER > OPTION > BODY
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level Description
DA-PORT 2 Title Port setting when DA is installed
Purpose of use, When used This item is used when DA is installed. (used in Japanese machines only, not used in overseas
machines) Set the port for communication with the DA (Digital Accessory).
Precautions for use When this item is set to '1', the following items are also set to ON.
COPIER > OPTION > BODY > STS-PORT
> CMD-PORT
> SSH-SW
> DA-PORT
Settings and adjustment
ranges 0: Closed
1: Opened (when DA is installed)
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures For future expansion (The setting must not be changed.)
Related service modes -
Additional description and
notes -
DA-CNCT 2 Title WPGW connection setting
Purpose of use, When used Set the WPGW connection. (used in Japanese machines only, not used in overseas machines)
Precautions for use -
Settings and adjustment
ranges 0: OFF
1: ON
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes WPGW : Workplace Gateway
CHNG-STS 2 Title Setting of T.O.T. status connection port number
Purpose of use, When used This item is used when Service NAVI is used. Set the number of the port used for the status connection
in T.O.T.
Precautions for use -
Settings and adjustment
ranges 1 to 65535
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 20010
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
CHNG-CMD 2 Title Setting of T.O.T. command connection port number
Purpose of use, When used This item is used when Service NAVI is used. Set the number of the port number for the command
connection in T.O.T.
Precautions for use -
Settings and adjustment
ranges 1 to 65535
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 20000
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -