Canon iR3245, Service Manual

Page: 305 / 746

Chapter 10
10-3
10.2 Counters
10.2.1 Overview
0018-9981
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
The machine is equipped with counters that keep track of printouts according to the type of printer unit. The counters are indicated in response to a press on the
Check key on the control panel. The following shows the functions of the counter as set at time of shipment from the factory.
T-10-1
<Guide to Symbols>
large: large-sized paper (in feed direction, 364 mm or longer; count x 1)
small: small-sized paper (in feed direction, 364 mm or less).
total: all (C + P); count x 1.
double-sided: in auto double-side copying count x 1; feed.
- The 3-digit symbol in the Counter column indicates the setting in the following service does item:
1 through 6 under COUNTER > OPTION > USER > COUNTER.
- Counters 2 through 6 may be changed in the following service mode item:
COPIER > OPTION > USER.
*1 :F15-2011/ 2013/ 2111/ 2113/ 2313/ 2311
*2 :F15-2001/ 2101/ 2201/ 2301
*3 :F15-2031/ 2035/ 2131/ 2135/ 2231/ 2331
*4 :F15-2041/ 2141/ 2241/ 2341
*5 :F15-2091/ 2094/ 2191/ 2194/ 2391/ 2394
*6 :F15-2061/ 2161/ 2261/ 2361
** : by default, not indicated; may be changed in service mode.
*** : '0' is set for the following service mode item: COPIER>OPTION>USE>CNT-SW.
**** : '1' is set for the following service mode item: COPIER>OPTION>USE>CNT-SW.
Select a country code in CONFIG among the fixed numbers of country code (30 countries).
Change the country code in CONFIG by executing the following item; COPIER > OPTION > BODY > CONFIG.
10.2.2 Timing of Increasing the Count
0018-9982
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
The timing at which the count is increased differs depending on the printing mode (single-sided or double-sided), target of delivery, and type of accessory:
1. Singe-Sided Printing, 2nd Side of a Double-Sided Print
In single-side printing or for the 2nd side of a double-sided print, the count is increased when the trailing edge of the sheet is discharged outside the machine in
relation to the output of the following sensors:
T-10-2
2. 1st Side of a Double-Sided Print
When the double-sided print feed sensor (PS17) goes on, the machine will assume that printing on the 1st side has been completed, thereby increasing the count.
Machine model
Counter number (in service mode)/item
Counter 1 Counter 2 Counter 3 Counter 4 Counter 5 Counter 6
100V JP *1 *** total 1 not indicated ** not indicated ** not indicated ** not indicated ** not indicated **
101 000 000 000 000 000
100V JP *1 **** total 2 copy (total 2) total A2 not indicated ** not indicated ** not indicated **
102 202 127 000 000 000
120V TW *2 total 1 total (large) copy (total 1) copy (large) not indicated ** not indicated **
101 103 201 203 000 000
120V UL *3 *** total 1 total (large) copy (total 1) copy (large) not indicated ** not indicated **
101 103 201 203 000 000
120V UL *3 **** total 2 copy (total 2) not indicated ** not indicated ** not indicated ** not indicated **
102 202 000 000 000 000
230V *4 total 1 total (large) copy (total 1) copy (large) not indicated ** not indicated **
101 103 201 203 000 000
240V EUR *5 total (W/B /large) total (W/B /small) scan (total 1) print (total 1) not indicated ** not indicated **
112 113 501 301 000 000
240V CA *6 total 1 total (large) copy (total 1) copy (large) not indicated ** not indicated **
101 103 201 203 000 000
Condition Target of delivery Sensor
Finisher absent Tray 1 Delivery sensor (PS14)
Tray 2 No. 2 delivery sensor (PS1A)
Tray 3 No. 3 delivery sensor (PS5A)
Finisher present Finisher Delivery sensor of the finisher