Canon iR3245, Service Manual

Page: 100 / 746

Chapter 2
2-32
F-2-127
5) Remove the AC driver PCB from the host machine and replace it with the
new AC driver PCB [1].
- 3 wire saddles [2]
- 3 edge saddles [3]
- 9 connectors [4]
- 5 screws (w/washer) [5]
Before replacing the AC driver PCB
F-2-128
After replacing the AC driver PCB
F-2-129
6) Connect the connector for the cassette heater that is situated near the AC
driver PCB and is connected to the host machine to J482 [1] of the AC
driver PCB.
- 1 edge saddles [2]
- 1 wire saddles [3]
Connect the connector for the DC controller that is situated near the AC
driver PCB and is connected to the host machine to J486 [4] of the AC
driver PCB.
F-2-130
7) Insert the protrusion [2] of the environment switch unit into the host ma-
chine frame hole [1] and install the environment switch unit [4] with the
When turning detaching the environment heater switch cover [1], use a
flatblade screwdrivers.
When replacing the AC driver PCB, be sure to make a note of the position
of the connector and to connect the connector to the original position.
[1]
[1]
[2]
[2]
[3]
[3]
[1] [4]
[5]
[2]
[3]
[5]
[5]
[5]
[4]
[5]
[2]
[2]
[3]
[3]
[1] [4]
[5]
[2]
[3]
[5]
[5]
[5]
[4]
[5]
[4]
[3]
[1]
[2]