Canon iR3245, Service Manual

Page: 725 / 746

Chapter 18
18-31
18.4.5.2 Uploading Procedure
0019-0102
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Here is the MeapBack upload procedure as an example.
1) Start the machine in safe mode. (While pressing 2 + 8, turn ON the main power switch.)
2) Start up the SST.
3) Select the model [1] and the type of system software [2] ('Single'); then, check the network settings, and click [START].
F-18-47
- Do not select 'SramImg.bin' or 'Sublog.txt'.
- The file MeapBack or SramRCON may only be downloaded to their source machine.
- The machine must be in safe mode when uploading MeapBack.
- The machine must be in normal mode for uploading SramRCON.
Service PC
Main controller unit
Main controller PCB
MeapBack (safe mode only)
SramRCON (normal mode only)
SST
HDD
Meapback.bin
System
Printer unit
Uploading/Downloading
SRAM
DC controller PCB
EEPROM
Reader controller PCB
iR ----
MFP
USB
Target Selection
CONTROL Export Firm Selection
iR3245
MFP
USB
c:
Interface
Network
IP Address
172.16.1.100
EXIT
START
R e g i s t e r F i r m wa r e
CONNECT
D e l e t e F i r m wa r e
D e l e t e B a ck u p D a t a
S y s t e m M a n a g e m e n t
Select the target.
Click a button to execute.
Register Remove
Click the interface and click the [START]
button.
Service Support Tool DLM0 (Ver. X.XX E)
iR3245
Single
ALL
S t a r t A s s i s t M o d e
[1]
[2]