Canon iR3245, Service Manual

Page: 626 / 746

Chapter 17
17-128
BOX-BKUP 1 Title Switch to permit restoration of BOX backup data
Purpose of use, When used This item is used for replacement. Permit restoration of the backup data of other models (some
models).
Precautions for use -
Settings and adjustment
ranges 0: Restoration is permitted when the target model is the same model.
1: Restoration is permitted when the target model is a one-generation succeeding model.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes The setting value returns to '0' when restoration has been successfully completed.
RAG-CONT 1 Title Setting of the level of fixing smear control mode
Purpose of use, When used Set the level of fixing smear control mode.
Precautions for use -
Settings and adjustment
ranges 0 to 3
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 2
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
DNSTRANS 1 Title DNS transfer priority switch
Purpose of use, When used If both IPv6 and IPv4 are used and the DNS server supports IPv4, timeout occurs when DNS query is
executed by giving priority on IPv6. This item is used to give priority on DNS query by IPv4 in a case
like this. Determine the priority level on the protocol to be used for DNS query (IPv4/IPv6) based on
the value of DNStrans.
Precautions for use -
Settings and adjustment
ranges 0: IPv4 1: IPv6
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 1
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
MIBCOUNT 2 Title Charge counter MIB switch
Purpose of use, When used This item is used not to display the charge counter MIB. Change the range of the charge counter MIB
scope.
Precautions for use -
Settings and adjustment
ranges 0: All charge counter MIBs are displayed.
1: All charge counter MIBs displayed on the LUI are displayed.
2: No charge counter MIBs are displayed.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
COPIER > OPTION > BODY
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level Description