Canon iR3245, Service Manual

Page: 679 / 746

Chapter 17
17-181
T-17-84
COPIER > TEST > NET-CAP
Item Level Description
CAPOFFON 1 Title Switch to enable the built-in packet capture function
Purpose of use, When used Enable the function of capturing network data.
Precautions for use -
Settings and adjustment
ranges 0: The function is turned off.
1: The function is turned on.
Unit -
Related service modes -
Additional description and
notes -
STT-STP 1 Title Manual switch to stop the start of capturing
Purpose of use, When used Manually start or stop network capturing.
Precautions for use -
Settings and adjustment
ranges 1
Unit -
Related service modes -
Additional description and
notes -
CAPSTATE 1 Title Displaying the status of the network capture function.
Purpose of use, When used Display the status of the network capture function.
Precautions for use -
Settings and adjustment
ranges When this item is selected in the screen, the current status is displayed. (Unless selection is made, the
status is not updated.)
<Details of display>
"RUNNING": Operation is running. "STOP": Operation is being stopped. "FILERR": Operation is
being stopped due to a filter setting error.
"HDDFULL": Operation is being stopped due to HDD Full. "GENERROR": Operation is being
stopped due to other errors.
Unit -
Related service modes -
Additional description and
notes -
PONSTART 1 Title Setting of whether to start network capture at power-on
Purpose of use, When used Set whether to start network capture when the power is on.
Precautions for use -
Settings and adjustment
ranges 0: Do not tart capturing when the power is turned on.
1: Start capturing when the power is turned on.
Unit -
Related service modes -
Additional description and
notes -
KEEPCAP 1 Title Setting of whether to continue capturing operation after the power is turned OFF/ON
Purpose of use, When used Set whether to continue capturing operation after the power is turned OFF/ON if capturing operation
has been executed before the power is turned OFF. When PONSTART is set to ON, capturing
operation starts even if KEEPCAP is set to OFF.
Precautions for use -
Settings and adjustment
ranges 0: Do not continue capturing operation. (When the power is turned OFF during capturing operation,
the capturing operation does not continue after the power is turned ON next time.)
1: Continue capturing operation. (When the power is turned OFF during capturing operation, the
capturing operation continues after the power is turned ON next time.)
Unit -
Related service modes -
Additional description and
notes -
OVERWRIT 1 Title Setting for overwriting of captured data
Purpose of use, When used Set whether to continue capturing operation while deleting old captured data when the HDD area to
save captured data has become full.
Precautions for use -
Settings and adjustment
ranges 0: When HDD becomes full, stop capturing operation.
1: When HDD becomes full, delete old captured data and continue capturing operation.
Unit -
Related service modes -
Additional description and
notes -