Canon iR3245, Service Manual

Page: 115 / 746

Chapter 2
2-47
F-2-200
B: In the case that the card reader has been installed on the host
machine
F-2-201
14) Insert the other side of cable [1] into the terminal [2] of the voice opera-
tion board.
F-2-202
15) Remove the 3 face seals [1] at the rear cover. (Do not use the removed
face seals.)
F-2-203
16) Install the wire saddles [1] to the 3 locations that the face seals have been
removed.
F-2-204
17) Fix the cable [1] with the 3 wire saddles [2] while preventing excess
slack on the cable as shown in the figure.
F-2-205
18) Make a turn of the ferrite core [2] around the foot switch cable [1] of the
user and install it, and then insert it into the terminal [3] of the voice op-
eration board.
[1] [2]
[3]
[1] [2]
[3]
[1] [2]
Be sure to install the ferrite core as close as possible to the connection of the cable.
[1]
[1]
[1] [2] [2]