Canon iR3245, Service Manual

Page: 477 / 746

Chapter 16
16-9
T-16-7
XX= "01" to "FF"
T-16-8
[HDD formatting]
T-16-9
XX YY Description Remedy
00
01
The HDD cannot be recognized. The startup partition (BOOTDEV)
cannot be found at startup. 1. Turn off the main switch, and check the cable connector. Then, turn on the
main switch.
2. Check to see if the HDD spins up when the main switch is turned on and if the
5V/12V power is supplied.
3. If the symptom still exists after the foregoing, replace the HDD, re-install the
system software. If the symptom still exists, replace the main board.
02
The system software for the main CPU does not exist. 1. Start in safe mode, reinstall a system, and turn OFF/ON the power.
2. Replace the HDD and reinstall a system.
03
Suspension of a write operation to the boot device has been detected. 1. Start in safe mode, reinstall a system, and turn OFF/ON the power.
2. Replace the HDD and reinstall a system.
06
The system software of the sub CPU does not exist. 1. Start in safe mode, reinstall a system, and turn OFF/ON the power.
2. Replace the HDD and reinstall a system.
XX YY
XX
CHK-
TYPE
Partition Description
Occurrence at time of
start-up
Occurrence during
normal execution
03 05
00,01,0
2,04
11,21 13,25
10,12,14,
22,23,24
Action Action
01
1
FSTDEV compressed image data (e.g., Box)
*1 *5
*9 *10 *11 *12
02 IMG_MNG file management table, profile
03 FSTCDEV job archiving (changing)
04
2
APL_GEN general-purpose data
05 TMP_GEN
general-purpose data (temporary file)
06 TMP_FAX
not used
07 TMP_PSS for PDL spool (temporary file)
08 3 PDLDEV PDL-related file
09 4 BOOTDEV
firmware (system, MEAP, key, certificate, PDF dictionary, RUI,
content, voice dictionary)
*3 *8
10 5 APL_MEAP MEAP application *1 *5
11 6 APL_SEND address book, filter *2 *6
12 7 APL_KEEP
for non-initialization data storage
*3 *8
13 8 APL_LOG system log *1 *5
FF 0 not specified
check for and recovery of HDD full-fault sectors
*4 *7
XX CHK
-
TYP
E
Partition in
question
Description Typical item
deleted
HDD formatting by
HD-CLEAR
Normal mode +
HDD formatting
with SST
Safe mode + HDD
formatting with SST
01 1 DOSDEV General data storage area Entire
collection of
image data
(e.g., Box) Possible (4 partitions,
simul-taneously) Not possible Not possible
02 1 FSTDEV Image data storage area (e.g., Box) Entire
collection of
image data
(e.g., Box) Possible (4 partitions,
simul-taneously) Not possible Not possible
03 1 DOSDEV2 Image thumbnail display data area (e.g., Box) Entire
collection of
image data
(e.g., Box) Possible (4 partitions,
simul-taneously) Not possible Not possible
04 1 FSTPDEV Image data storage area (e.g., Box) Entire
collection of
image data
(e.g., Box) Possible (4 partitions,
simul-taneously) Not possible Not possible
05 2 DOSDEV3 General file storage area (user settings, logs,
PDL spool, image data control info) Items that are
relatively less
critical Possible Not possible Not possible
06 3 PDLDEV PDL-related file storage area (font, registered
form, ICC profile, color correction info file for
PDL function) User Font
IccProfil Possible Not possible Not possible
07 4 DOSDEV4 Firmware storage area (address book, filter) Address book Not possible Not possible Not possible
08 4 BOOTDEV Firmware storage area (System, Language, RUI) System
software
Not possible Specify the BOOTDEV and perform a format.
System download is required after format.
09 5 DOSDEV5 For future expansion None in
particular Possible Not possible Not possible