Canon iR3245, Service Manual

Page: 224 / 746

Chapter 7
7-24
1) Execute toner stirring.
COPIER> FUNCTION> INSTALL> STIR-K
2) Clear the counter of consumables.
COPIER> COUNTER> DRBL-1> DVG-CYL
3) Execute auto gradation correction (additional function mode)
Additional functions> Adjustment/cleaning> Auto gradation
correction
7.12.7 Transfer Charging Roller
7.12.7.1 Removing the Transfer Roller
0018-9802
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Press the release button [1] and open the right cover [2].
F-7-51
2) Pull out the pin [1] toward the front.
F-7-52
3) Remove the holder [1] at the front side of the transfer roller.
F-7-53
4) Remove the transfer roller [1] toward the front.
F-7-54
7.12.8 Waste Toner Box
7.12.8.1 Removing the Waste Toner Container
0018-9804
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the front cover unit.
(page 10-17)
Reference[Removing the
Front Cover Unit]
2) Remove the waste toner container [1].
F-7-55
A test copy that is made right after the toner has been stirred can be soiled
on its back with a small amount of stray toner. The symptom will likely
disappear when 3 or so copies are made.
[1] [2]
Points to note when attaching the transfer roller
- Be sure that the top of the holder [1] is attached inside the static eliminator
[2].
- Be sure that the spring [1] of the holder is fitted with the pushing position
[2].