Canon iR3245, Service Manual

Page: 650 / 746

Chapter 17
17-152
JA-JOB 2 Title Setting of the target job for job archiving
Purpose of use, When used When the job archive function is enabled, archiving is performed when executing the job in
accordance with the specified job type of the target job.
Precautions for use The setting cannot be changed in the service mode; only reference is allowed. The setting can be only
made from the MEAP program supporting job archive.
Settings and adjustment
ranges 0: None, 3: Limited to FAX/IFAX
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures -
Related service modes -
Additional description and
notes -
JA-RESTR 2 Title Setting of restriction items for job archive
Purpose of use, When used When the job archive function is enabled, specification restriction operation is performed for the target
function in accordance with the setting made.
Precautions for use The setting cannot be changed in the service mode; only reference is allowed. The setting can be only
made from the MEAP program supporting job archive.
Settings and adjustment
ranges Bit0: Image file acquisition function (0: OFF, 1: ON)
Bit1: Form registration composite function (0: OFF, 1: ON)
Bit2: Document edit function (0: OFF, 1: ON)
Unit 32 specification restrictions based on Bit definition
Value at time of shipment
from factory/Value
established when RAM is
cleared -
Setting, adjustment and
operation procedures -
Related service modes -
Additional description and
notes -
LDAP-SW 1 Title LDAP server search condition selector switch
Purpose of use, When used Set the search conditions when searching for email addresses, etc. from the LDAP server.
Precautions for use -
Settings and adjustment
ranges 0: '(Target) including next'
1: '(Target) excluding next'
2: '(Target) same as next'
3: '(Target) not the same as next'
4: '(Target) starting with next'
5: '(Target) ending with next'
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 4
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes LDAP: Lightweight Directory Access Protocol
The LDAP server registration can be performed by accessing the LDAP server registration from the
system control settings. Once registered, email addresses, etc. can be searched from it. The search
results (email addresses, etc.) can be registered on address lists, etc.
FROM-OF 1 Title From address deletion switch when sending mail
Purpose of use, When used Set whether to delete the from address when sending mail.
Precautions for use -
Settings and adjustment
ranges 0: The from addresses are not deleted.
1: The from addresses are deleted.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
COPIER > OPTION > USER
Item Level Description