Canon iR3245, Service Manual

Page: 331 / 746

Chapter 10
10-29
10.5.9.2 Removing the Control Panel CPU PCB
0018-9952
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the control panel CPU PCB [7].
- 2 flat cables [2, 4]
- 3 connectors [5]
- 4 screws [6]
F-10-73
10.5.10 Control Panel USB PCB
10.5.10.1 Before Removing the Control Panel USB PCB
0019-8372
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the control panel unit.
(page 10-25)
Reference[Removing the
Control Panel Unit]
2) Remove the control panel lower cover.
(page 10-21)
Reference[Remov-
ing the Control Panel Lower Cover]
10.5.10.2 Removing the Control Panel USB PCB
0019-8373
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the control panel USB PCB [1].
- 1 USB connector [2]
- 2 screws [3]
F-10-74
10.5.11 FAX Unit
10.5.11.1 Removing the Fax Unit
0019-4140
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the upper rear cover.
(page 10-17)
[Removing the Upper Rear
Cover]
2) Remove the FAX unit for 2 lines or the FAX unit for 2/3 lines with the
cable as needed.
For details, refer to the parts replacement procedure 'Removing the Fax
Unit' in the service manual for the Super G3 2nd/3rd Line FAX Board-
AC1 or that for the Super G3 2nd Line FAX Board-AC1.
3) Disconnect the connector [1] and free the cable [2] from the edge saddle
[3].
F-10-75
Be sure to remove the stoppers [1, 3] to the direction of the arrow. The 2
stoppers [1, 3] are moved to the different directions, respectively.
MEMO:
The control panel USB PCB is installed only on the machine equipped with
the control panel USB port.
[1]
[2]
[4]
[3]
[6]
[7]
[6]
[6] [5]
[2]
[1]
[3]
[1] [2]
[3]