Canon iR3245, Service Manual

Page: 600 / 746

Chapter 17
17-102
T-17-50
COPIER > OPTION > BODY
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level Description
MODEL-SZ 1 Title Selection of standard variable size display and ADF document detection size
Purpose of use, When used Select the standard variable size display and ADF document detection size.
Precautions for use -
Settings and adjustment
ranges 0: AB type (6R5E)
1: Inch type (5R4E)
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared Varies depending on the destination.
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes The value (0, 1) is automatically set in accordance with the destination.
FIX-CLN 2 Title Setting of the frequency to execute fixing cleaning
Purpose of use, When used Set the frequency to execute fixing cleaning.
Precautions for use -
Settings and adjustment
ranges 0: Do not execute cleaning
1: Once every 500 prints, temperature control at 225degC, idling for 60 sec
2: Once every 200 prints, temperature control at 225degC, idling for 60 sec
3: Once every 100 prints, temperature control at 225degC, idling for 60 sec
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
FIX-TEMP 1 Title Selection of the fixing temperature mode
Purpose of use, When used Select the fixing temperature mode.
Precautions for use -
Settings and adjustment
ranges 0: OFF
1: Priority is given to productivity. The controlled temperature is fixed at -20degC.
2: The controlled temperature is fixed at -10degC.
3: The controlled temperature is set to -20degC only when the room temperature is 21degC or higher.
4: The controlled temperature is set to -10degC only when the room temperature is 21degC or higher.
5: The controlled temperature is fixed at +6degC.
6: The controlled temperature is fixed at +10degC.
7: The controlled temperature is fixed at +15degC.
Unit degC
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes COPIER > OPTION > BODY > TEMP-CON (Level 1)
COPIER > OPTION > BODY > TEMPCON2 (Level 1)
Additional description and
notes This item can be used with the setting of TEMP-CON or TEMPCON2.
Example)
When "FIX-TEMP=-6degC, TEMP-CON=-6degC" is set, the controlled temperature is offset at -
12degC.
CPMKP-SW 2 Title ON/OFF of sequence to decrease the copy speed
Purpose of use, When used Decrease the copy speed to maintain fixing performance.
Precautions for use -
Settings and adjustment
ranges 0 : OFF 1 : ON
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -