Canon iR3245, Service Manual

Page: 578 / 746

Chapter 17
17-80
CARD 1 Title Setting of the card number of the card reader
Purpose When installing the card reader/after replacing the HDD
Note At execution, the card management information (department ID and personal identification number)
is initialized.
Displays, settings and
adjustment ranges 0 to 2001
Unit -
Value at RAM clear 0
Setting/Adjustment/Operation
method 1) Select (highlight) the item.
2) Input the number of card to use and press the OK key.
3) Turn off/on the main power switch.
OK/NG criteria -
Time required -
Related service modes COPIER > OPTION > BODY > CARD-RNG (level 2)
Additional description and
notes Serial number from the input to the number of cards set in CARD-RNG is the usable card number.
E-RDS 1 Title Setting to switch Embedded-RDS function use/unused
Purpose At using Embedded-RDS
Note Be sure to use the following five items; E-RDS, RGW-PORT, COM-TEST, COM-LOG, RGW-ADR
in a set.
Displays, settings and
adjustment ranges 0: Unused 1: Use (transmitting all counter information)
Unit 0
Value at RAM clear -
Setting/Adjustment/Operation
method 1) Select (highlight) the item, input the setting, and then press the OK key.
2) Turn off/on the main power switch.
OK/NG criteria -
Time required -
Related service modes COPIER > FUNCTION > INSTALL > E-RDS, RGW-PORT, COM-TEST, COM-LOG, RGW-
ADR(level 1)
Additional description and
notes Embedded-RDS is a function of transmitting device information such as device counter/fault/durables
and consumables to the server of the sales company using SOAP protocol.
RGW-PORT 1 Title Specifying the port number of the server of the sales company to be used in Embedded-RDS
Purpose At using Embedded-RDS
Note Be sure to use the following five items; E-RDS, RGW-PORT, COM-TEST, COM-LOG, RGW-ADR
in a set.
Displays, settings and
adjustment ranges 1 to 65535
Unit 443
Value at RAM clear -
Setting/Adjustment/Operation
method 1) Select (highlight) the item, input the setting and press the OK key.
2) Turn off/on the main power switch.
OK/NG criteria -
Time required -
Related service modes COPIER > FUNCTION > INSTALL > E-RDS, RGW-PORT, COM-TEST, COM-LOG, RGW-ADR
(level 1)
Additional description and
notes -
COM-TEST 1 Title Checking the connection with the server of the sales company to be used in Embedded-RDS
Purpose When using Embedded-RDS (Try to connect the server of a sales company, judge if the connection is
successful, and then display the result.)
Note Be sure to set the following five items; E-RDS, RGW-PORT, COM-TEST, COM-LOG, RGW-ADR
in a set.
Displays, settings and
adjustment ranges During operations: 'ACTIVE'
At connection: 'OK' When connection fails: 'NG'
Unit -
Setting/Adjustment/Operation
method Select (highlight) the item and press the OK key.
OK/NG criteria It is OK if the display is changed into 'OK' after 'ACTIVE' (blinking) is displayed.
Time required -
Related service modes COPIER > FUNCTION > INSTALL > E-RDS, RGW-PORT, COM-TEST, COM-LOG, RGW-
ADR(level 1)
Additional description and
notes -
COPIER > FUNCTION > INSTALL
Item Level Description