Canon iR3245, Service Manual

Page: 108 / 746

Chapter 2
2-40
F-2-167
3) Install the upper rear cover.
4) Insert the power plug into the outlet.
5) Turn ON the main power switch.
2.15 Installing the Voice Guidance Kit
2.15.1 Notice At Installation
0019-9919
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
2.15.2 Checking the Contents
0019-9920
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
<Voice Guidance Kit-D1>
F-2-168
<CDs/guides>
- Voice guidance guide
- Voice guidance guide CD
- FCC/IC Sheet
2.15.3 Turning Off the Power of the Host Machine
0019-9921
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Be sure to refer to "Points to Note When Turning OFF the Main Power" in
installation of the host machine.
2.15.4 Installation Procedure
0019-9922
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the upper rear cover [1].
- 9 screws [2]
F-2-169
2) Remove the face plate [1]. (Do not use the removed face plate.)
- 2 screws [2]
F-2-170
3) Install the 2 card spacers [1] on the main controller PCB.
See 'Combination Table of Accessories' when installing this equipment.
- When installing this equipment with the Expansion Bus, be sure to install
this equipment first.
- If the Expansion Bus has been installed, be sure to remove it and then
install this equipment.
[1] Speaker unit (upper) 1pc
[2] Speaker unit (lower) 1pc
[3] Cable (1300 mm) 1pc
[4] Cable guide
(4 or 5 pc used for this equipment) 7pc
[2]
[1]
[3]
[3]
[1] [2]
[3] [4] [5]
[9] [10] [11]
[6]
[8]
[7]
[5] Voice board unit 1pc
[6] Card spacer 2pc
[7] Screw (TP; M3X6) 1pc
[8] Screw (binding; M4X6) 1pc
[9] Screw (binding; M3X16) 1pc
[10] Screw (binding; M4X16) 1pc
[11] Ferrite core 2pc
[1]
[2] [2]
[1] [2]