Canon iR3245, Service Manual

Page: 601 / 746

Chapter 17
17-103
HUM-SW 2 Title Selection of the level of transfer current output by the environment sensor
Purpose of use, When used Use this item when a failure occurs to the environment sensor. The output level of transfer current is
controlled in accordance with the specified environment.
Precautions for use -
Settings and adjustment
ranges 0: Automatic control by the environment sensor
1: Low humidity
2: Rather low humidity
3: Normal humidity
4: Rather high humidity
5: High humidity
Make the setting in accordance with the installation environment. The transfer current output level is
controlled in accordance with the specified environment.
Low-humidity environment: The transfer current output level increases.
High-humidity environment: The transfer current output level decreases.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
SCANSLCT 2 Title ON/OFF of the function to calculate the scanned area from the selected paper size
Purpose of use, When used Make ON/OFF setting of the function to calculate the scanned area from the selected paper size.
Precautions for use If "1" is set when the paper size is larger than the document size, the scanned area increases and
productivity decreases.
Settings and adjustment
ranges 0: OFF (The scanned area is determined based on the document size detected.)
1: ON (The scanned area is determined based on the paper size.)
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
PASCAL 1 Title Selection of whether or not to use the contrast potential and gradation correction data calculated by
automatic gradation correction control
Purpose of use, When used Select whether or not to use the contrast potential and gradation correction data calculated by
automatic gradation correction control.
Precautions for use -
Settings and adjustment
ranges 0 to 3
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
COPIER > OPTION > BODY
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level Description