Canon iR3245, Service Manual

Page: 86 / 746

Chapter 2
2-18
F-2-70
7) Clean around the host machine.
2.6 Installing the Card Reader
2.6.1 Notice At Installation
0019-5419
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
2.6.2 Checking the Contents
0018-9070
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
<Card Reader-C1>
F-2-71
<Card Reader Attachment-B3>
F-2-72
2.6.3 Turning OFF the Power of the Host Machine
0018-9072
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Be sure to refer to "Points to Note When Turning OFF the Main Power" in
installation of the host machine.
2.6.4 Installation Procedure
0018-9173
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Open the cassette upper right cover [1]. If the cassette pedestal is installed,
open the cassette lower right cover [2].
- Installation of the equipment calls for a Card Reader Attachment-B3.
- See "Combination Table of Accessories" when installing this equipment.
[1] Card reader 1 pc.
[2]* Screw (RS tightening; M4X10) 1 pc.
[3]* Toothed washer 1 pc.
* Not used in this host machine.
[1]
C
[1]
[2] [3]
[1] Card reader attachment base 1pc
[2]*1 Card reader support plate 1pc
[3]*1 Relay harness1 1pc
[4] Relay harness2 1pc
[5] Screw (TP; M4X25) 1pc
[6]*2 Screw (TP; M4X8) 2pc
[7] Toothed washer 2pc
*1 Not used in this host machine.
*2 1pc is used with this host machine.
After the card reader is installed, go through the following in Service Mode
of this machine: COPIER > FUNCTION > INSTALL > CARD, and enter
the card number to use. Be sure to enter the card number otherwise the card
is not recognized when the card is inserted.
[1]
[4]
[5] [7] [6] 2
[2] 1
[3]
1