Canon iR3245, Service Manual

Page: 642 / 746

Chapter 17
17-144
17.6.1.18 COPIER > OPTION > USER (3/7)
0019-9617
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
T-17-68
COPY-JOB 1 Title Prohibition of copy job reservations when card reader/coin vender is used
Purpose of use, When used Prohibit copy job reservations when the card reader or coin vender is used.
Precautions for use -
Settings and adjustment
ranges 0: Reservation enabled
1: Reservation prohibited
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
OP-SZ-DT 2 Title Setting as to whether to detect document sizes while platen remains open
Purpose of use, When used This item is used document sizes are to be detected automatically in cases where thick books, 3-
dementional objects, etc. are scanned. This item is used when document size detection is to be
activated while the platen remains open.
Precautions for use When COPIER > OPTION > USER > SIZE-DET(Level 2) is set to '0', the document sizes are not
detected while the platen remains open even if this mode is set to '1'.
Settings and adjustment
ranges 0: Document sizes cannot be detected while the platen remains open.
-> The document sizes must be input from the operation unit screen.
1: Document sizes can be detected while the platen remains open.
-> The document sizes are detected by pressing the start key.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes COPIER > OPTION > USER > SIZE-DET (Level 2)
Additional description and
notes -
COPIER > OPTION > USER
Item Level Description
NW-SCAN 2 Title Enabling of network scan function
Purpose of use, When used Enable the network scan function.
Precautions for use The setting cannot be changed on machines for the Japanese market.
This item is fixed at '1' for PS/PCL machines destined for overseas.
Settings and adjustment
ranges 0: The network scan function is not enabled.
1: The network scan function is enabled.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared -
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
COPIER > OPTION > USER
Item Level Description