background image

This document has been published to be used for

after sales service only.

The contents are subject to change without notice.

Parts marked with “

“ are important for maintaining the safety of the set. 

Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

SHARP CORPORATION

DIGITAL COPIER

MODEL

AR-1118

CODE : 00ZAR1118/A1E

AR-1118

(with option installed)

[ 1 ] NOTE FOR THIS SERVICE MANUAL  . . . . . . . . . . . . . . . . . . . . . . AR-1118

[ 2 ] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AR-1118

[ 3 ] CONSUMABLE PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AR-1118

[ 4 ] EXTERNAL VIEWS AND INTERNAL STRUCTURES  . . . . . . . . . . AR-1118

[ 5 ] UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . AR-1118

[ 6 ] ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Refer to AR-M160

[ 7 ] SIMULATIONS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AR-1118

[ 8 ] USER PROGRAMS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AR-1118

[ 9 ] TROUBLE CODE LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . Refer to AR-M160

[10] MAINTENANCE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AR-1118

[11] DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . Refer to AR-M160

[12] FLASH ROM VERSION UP PROCEDURE  . . . . . . . . . . . Refer to AR-M160

[13] ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AR-1118

CONTENTS

[00]COVER.fm  1 

ページ

  

2005年3月24日 木曜日 午後6時51分

Summary of Contents for AR-1118



















Reviews: