Canon iR3245, Service Manual

Page: 81 / 746

Chapter 2
2-13
F-2-49
4) Connect the USB cable [1] to the host machine.
F-2-50
2.2.6 Fixing the Host Machine
0019-0207
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
<In case that cassette feeding unit is installed>
1) Move the host machine to the installation position and secure it with the 4
adjusters [1] of the cassette feeding unit.
F-2-51
<In case that cassette feeding unit is not installed>
1) Remove the cassette 1, 2 and temporally tighten the adjustment screws [1]
until they slightly touch the bottom plate of the host machine.
F-2-52
2) Check the stability of the host machine against a desk or floor etc and
tighten the adjustment screw depending on the situation.
- If there is a gap in [A] direction, tighten the screw [a].
- If there is a gap in [B] direction, tighten the screw [b].
F-2-53
F-2-54
3) Put back the cassette 1, 2.
2.2.7 Connecting the Cable
0020-0088
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) When installing the cassette feeding unit, remove the lattice connector
cover and insert the lattice connector [1] of the cassette feeding unit into
the host machine.
F-2-55
2) Plug in the power code.
[1] [2]
[1]
[1]
[1]
[1]
For other than the models with DADF, install the copyboard cover or the
DADF as an option. When installing the DADF, refer to the installation
procedure of the DADF.
[B] [B]
[A]
[A]
[b] [a]
[1]