Canon iR3245, Service Manual

Page: 625 / 746

Chapter 17
17-127
T-17-62
COPIER > OPTION > BODY
The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level Description
PT3-INEX 2 Title Enable switch for paper brand Type 3 import/export
Purpose of use, When used Enable the paper brand Type 3 information to be handled by the following functions:
- Import/export using remote UI
- Distribution of equipment information
- Import/export from iWEMC
Precautions for use -
Settings and adjustment
ranges 0: Not enabled
1: Enabled
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -
IFX-CHIG 1 Title Setting of operation by number of characters in iFAX incoming mail text
Purpose of use, When used To ensure that mail text during iFAX reception is not printed or transmitted when it has fewer
characters than the number set.
Precautions for use Mail text consisting solely of the carriage return codes is sometimes sent by an another machine, and
the machine will print a blank sheet in a case like this. The printing of blank sheets can be eliminated
when a value of '2' or so is set for this item. However, users should be urged to exercise caution since
mail text containing fewer the number of characters than the number set will no longer be printed.
Settings and adjustment
ranges 0 to 999
0: No mail text is ignored.
Unit Number of characters
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes - Concerning operation when a setting other than '0' is used
If the incoming mail is determined to have no main text and no attached TIFF files are present, one
page bearing only headers and footers will be printed and transmitted.
- Chinese characters ('kanji') are calculated at the rate of 2 bytes per character, and the carriage return
codes and other control codes are included in the number of characters.
USB-RCNT 2 Title Automatic connection setting during USB device disconnection
Purpose of use, When used Set whether to initiate automatic connection when USB devices are disconnected.
Precautions for use If this item is set to '1' and a USB hub is provided, all the devices will be re-connected when one of
them has been disconnected.
Settings and adjustment
ranges 0: No automatic connection
1: Automatic connection
When this item is set to '0', a USB device cannot be used once it has been removed. To re-connect the
device, the power of the machine must be set to OFF and then back ON.
When this item is set to '1', a USB device can be automatically re-connected even when it has been
removed and re-installed.
Unit -
Value at time of shipment
from factory/Value
established when RAM is
cleared 0
Setting, adjustment and
operation procedures 1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and
notes -