Canon iR3245, Service Manual

Page: 274 / 746

Chapter 8
8-42
1) Free the harness [2] from the 1 wire saddle [3].
- 1 connector [1]
- 2 reuse-bands [4]
F-8-82
2) Open the 3 way unit [1] and remove the 2 screws [2].
3) Close the 3 way unit [1] and remove the 2 screws [3].
F-8-83
4) Remove the 3 way unit [1].
F-8-84
8.8.21 Feeding Roller
8.8.21.1 Removing the Pickup Roller/Feed Roller/
Separation Roller
0018-9872
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the cassette.
2) Open the right cover (in the case of separation roller).
3) Hold the tab to remove the pickup roller [1]/feed roller [2]/separation roll-
er [3].
F-8-85
8.8.22 Vertical Path Roller
8.8.22.1 Before Removing the Vertical Path Roller
0018-9873
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the rear right cover.
(page 10-16)
Reference[Removing the
Rear Right Cover]
2) Release the right cover.
(page 10-36)
Reference[Releasing the Right
Cover]
3) Remove the right cover (lower front).
(page 10-16)
Reference[Remov-
ing the Right Cover (Lower Front)]
4) Remove pickup unit 1.
(page 8-30)
Reference[Removing the Pickup
Unit 1]
5) Remove pickup unit 2.
(page 8-30)
Reference[Removing the Pickup
Unit 2]
6) Remove the sensor mounting plate.
(page 8-31)
Reference[Removing
the Sensor Mounting Plate]
8.8.22.2 Removing the Vertical Path Roller
0018-9874
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Release the claw [A] at the rear side to remove the gear [1] and the bushing
[2].
F-8-86
Point to note when replacing the feed roller/separation roller
The color of the feed roller/separation roller (roller core) of this machine is
black.