BinTec X4000, User Manual

Page: 323 / 498

X4000 User’s Guide 323
Activity Monitoring
10
The configuration is made in S
YSTEM
➧
E
XTERNAL
A
CTIVITY
M
ONITOR
:
Table 10-6:
S
YSTEM
➧
E
XTERNAL
A
CTIVITY
M
ONITOR
Field Meaning
Client IP Address IP address to which X4000 sends the UDP
packets.
The default value 255.255.255.255 means that
the broadcast address of the first LAN interface
is used.
Note: If you enter the IP address of a WAN
partner that can be reached over an ISDN
dialup connection, you will get a large
telephone bill due to frequent setting up of
ISDN connections (a packet is usually sent
every 5 seconds).
Client UDP Port Port number for Activity Monitor (default value:
2107, registered by IANA - Internet Assigned
Numbers Authority).
Type Type of information sent in the UDP packets to
the Windows application. Possible values:
■
off: deactivates Activity Monitor (default
value)
■
physical: only information about physical
interfaces
■
physical_virt: information about physical
and virtual interfaces
Update Interval (sec) Update interval in seconds. Possible values: 0
to 60 (default value: 5).
The breakdown of X4000 ’s interfaces into physical and virtual interfaces is
described in detail in the Software Reference .
Note: A leased line always represents a physical interface, but a group of
leased lines is displayed as both a physical and virtual interface!