BinTec X4000, User Manual

Page: 266 / 498

266 X4000 User’s Guide
Advanced Configuration of the Basic Unit with the Setup Tool
8
To do Proceed as follows to change one of the port numbers:
➤
Go to IP
➧
S
TATIC
S
ETTINGS
.
➤
Enter Remote CAPI Server TCP Port, Remote TRACE Server TCP Port,
RIP UDP Port and/or HTTP TCP Port.
➤
Press SAVE.
8.3.4 BOOTP Relay Agent
Bootstrap protocol The Bootstrap Protocol (
➤➤
BOOTP ) defines how a host (BOOTP
➤➤
client ) in a TCP/IP network receives his IP address and other
configuration information on booting. The BOOTP client sends a BOOTP
Request, a BOOTP server answers the request with a BOOTP Response and
supplies the client with the necessary information. As the server only hears
requests from the LAN in which it is located, it is sometimes advisable to set up
a BOOTP Relay Agent. The agent forwards all requests and responses
between the client and server via a WAN connection to this server.
Figure 8-4: X4000 as BOOTP Relay Agent
BootP-Server
BootP Relay Agent
B
IA
N
C A
/B
R
IC
K -X
M
ISDN
IP = 192.168.1.1
IP = ?
IP = ?
1
2
X4000D
Bin
Tec
4000
Your Local Area Network
WAN Partner’s
Network