BinTec X4000, User Manual

Page: 152 / 498

152 X4000 User’s Guide
Basic Configuration of Basic Unit with Setup Tool
7
Clock Mode Defines which connection partner sends the
clock signal for synchronization between
transmitter and receiver. Possible values:
■
auto (default value): The setting is based on
the Connector selected:
– X4000 sends the clock signal if
Connector = dce.
– X4000 receives the clock signal if
Connector = dte.
You can usually accept this setting.
■
external: X4000 receives the clock signal,
irrespective of the setting selected under
Connector.
■
internal: X4000 sends the clock signal,
irrespective of the setting selected under
Connector.
Speed Transmission rate of connection, scalable from
2400 bps to 8 Mbps.
The value to be set depends on the quality and
length of the cable and on the connection type
(balanced/unbalanced). Up to 8 Mbps are
possible over a short distance of up to 5 m if
shielded cables are used.
Default value: 64000 bps
Field Meaning