BinTec X4000, User Manual

Page: 301 / 498

X4000 User’s Guide 301
Resource Card with Digital Modems
9
Automode Defines whether dynamic negotiation of
parameters for baud rates and modem
standards is allowed with the dial-in user.
Possible values:
■
on (default value): Negotiation is allowed.
■
off: The set values are always used.
Min Bps Defines the minimum baud rate that can be
used with the modem profile. Any speed
supported by the modem standard set under
Modulation can be set here.
The connection is cleared if the only baud rates
that can be negotiated with the opposite
terminal are smaller than the value set here.
Scalable from
300 (default value) to 56000.
Max Receive Bps Defines the maximum baud rate of incoming
data ("upstream") that can be used with the
modem profile. Any speed supported by the
modem standard set under Modulation can be
set here.
The value set under Max Transmit Bps is used
here if this value is less than the value set here.
Scalable from 300 to 56000,
default value:
33600.
Max Transmit Bps Is only used if Modulation = V.90.
Defines the maximum baud rate of outgoing
data ("downstream") that can be used with the
modem profile.
Scalable from 300 to 56000,
default value: 33600.
Field Meaning