BinTec X4000 User Manual Download Page 230

Page: 230 / 498

230

X4000

User’s Guide

Advanced Configuration of the Basic Unit with the Setup Tool

controlled by a so-called Routing Protocol, e.g. RIP (Routing Information

Protocol).

RIP

Routers use the

➤➤

RIP

to exchange the information stored in their routing

tables by communicating with each other at regular intervals to mutually

supplement and renew their routing entries.

X4000

supports both version 1 and

version 2 of RIP, either exclusively or parallel.

RIP is configured separately for LAN and WAN.

Active and passive

Routers can be defined as active or passive routers: Active routers offer their

routing entries to other routers via

➤➤

broadcasts

. Passive routers accept

the information from the active routers and store it, but do not pass on their own

routing entries.

X4000

can do both.

WAN partner

If you negotiate to receive and/or send RIP packets from/to your WAN partner,

X4000

can exchange routing information dynamically with the routers in the

LAN of the WAN partner.

Configuration is made in:

■

WAN P

ARTNER

➧

DIT

➧

DVANCED

ETTINGS

■

CM-100BT, F

AST

THERNET

➧

DVANCED

ETTINGS

Table 8-27:

WAN P

ARTNER

➧

DIT

➧

DVANCED

ETTINGS

CM-100BT, F

AST

THERNET

➧

DVANCED

ETTINGS

Receiving routing tables via the RIP is a possible security loophole, as external
computers or routers can change

X4000

’s routing functionality.

RIP packets do not set up or hold ISDN connections.

Field

Meaning

RIP Send

Enables RIP packets to be sent via the
interface to the WAN partner and LAN
interface.

RIP Receive

Enables RIP packets to be received via the
interface to the WAN partner and LAN
interface.

Summary of Contents for X4000


















































































































































































































































































































































































































































































































Search results

Summary of Contents for X4000

Reviews:

Related manuals for X4000

Brands by name

Popular brands

BinTec X4000, User Manual

Search results

Summary of Contents for X4000

Reviews:

Related manuals for X4000

Brands by name

Popular brands