BinTec X4000, User Manual

Page: 32 / 498

32 X4000 User’s Guide
General Safety Precautions
2
temperature and to dry out completely before operating. Observe the
ambient conditions under Technical Data.
■
Make sure the local mains voltage is the same as the nominal voltages of
the mains unit. The equipment may only be operated under the following
conditions.
– 100 - 240 V AC
– 50 - 60 Hz
■
Make sure the safety mains socket in the building is freely accessible. You
must remove the mains plug to disconnect the equipment completely from
the mains.
■
Make sure you follow the correct cabling sequence, as described in the
manual. Use only the cables supplied with the equipment or cables that
meet the specifications in this manual. If you use other cables, BinTec
Communications AG cannot accept liability for any damage occurring or for
any adverse effects on operation. The equipment guarantee is invalidated
in such cases.
■
Connect the equipment as described in the manual.
■
Arrange the cables so that they are not in the way and cannot be tripped
over or damaged.
■
Do not connect, disconnect or touch the data lines during lightning storms.
Operation according to
the regulations
■
X4000 is intended for use in offices. As an ISDN multiprotocol router,
X4000 establishes WAN connections depending on the system
configuration. To avoid extra charges, you should carefully monitor the
product.
■
X4000 meets the relevant safety standards for information technology
equipment for use in offices.
■
Operation of the system according to IEC 950/EN 60950 is only
guaranteed when the top of the housing is fitted (cooling, fire protection,
RFI suppression).
■
Ambient temperature should not exceed 50 °C. Avoid exposure to direct
sunlight.