BinTec X4000, User Manual

Page: 25 / 498

X4000 User’s Guide 25
About this Manual
1
1.7 About this Manual
1.7.1 Contents
This manual is structured as follows:
Chapter Contents
1: "Welcome!" General introduction, scope of supply,
guarantee terms, information about this
manual.
2: "General Safety
Precautions" General safety precautions.
3: "Hardware Description
and Installation" Description of the hardware (basic unit,
expansion cards, MMI, LEDs, connections).
Instructions on how to install the 19-inch built-in
unit in the rack, how to change over the display,
how to install and remove an expansion card,
and how to connect the equipment. Description
of boot sequence.
4: "Configuration
Requirements" Description of access and configuration
options. A basis for working with the Setup
Tool. Procedure for initial configuration.
5: "Man-Machine
Interface (MMI) – Display
with User Guide" How to use the MMI with display and input
keys.
6: "Fast Configuration
with the Configuration
Wizard (Basic Unit)" How to take X4000 into operation in a few
minutes using the Windows tool Configuration
Wizard and how to install and set up other
useful software.
7: "Basic Configuration of
Basic Unit with Setup
Tool" How to take X4000 into operation with the
Setup Tool and set up a basic configuration
(including configuration of the WAN interfaces).