BinTec X4000, User Manual

Page: 31 / 498

X4000 User’s Guide 31
2
2 General Safety Precautions
The following sections contain safety precautions you are strongly advised to
heed when working with your equipment.
Transport and
storage
■
Only transport and store X4000 in its original packaging or use other
appropriate packaging to protect against knocking and shaking.
Installation and
operation
■
Read the information on the ambient conditions (see Technical Data)
before installing and operating X4000 . Place the equipment on a firm flat
base.
■
Electrostatic charges may cause damage to the equipment. You should
therefore wear a grounded wrist strap or touch a grounded surface before
you touch sockets or extension cards of X4000 . Only grip extension cards
at the edges and do not touch components or conductor tracks.
■
Keep the unused extension slot covered with the dummy cover to prevent
objects getting inside the equipment. Foreign bodies located in the
equipment during operation create a danger of electric shock and short-
circuits.
■
Ensure that no sharp objects can damage the window of the display
module. Protect the display module against knocks and dropping and only
connect it to the RJ11 socket provided for this purpose on X4000 to prevent
damage to X4000 and the display module.
■
Make sure the cables do not cover the ventilation slots of the equipment or
interfere with ventilation. Obstructing the ventilation of X4000 may cause
damage to the equipment. Damage caused by lack of ventilation
invalidates the guarantee.
■
Never open the basic unit or tamper with the mains unit in any way, as this
can create a lethal danger through electric shock. Don’t remove any fixing
screws on the basic unit.
■
Condensation may occur externally or internally if the equipment is moved
from a colder room to a warmer room. When moving the equipment under
such conditions, allow ample time for the equipment to reach room