BinTec X4000, User Manual

Page: 80 / 498

80 X4000 User’s Guide
Configuration Requirements
4
Figure 4-3: Setup Tool menu layout
The Setup Tool is easy to use. After a few minutes, you will have no problem
finding your way around. Nevertheless, you should first familiarize yourself with
the facilities offered by the Setup Tool. By way of introduction, we would first like
to point out a few things you should be aware of when using the X4000 Setup
Tool.
Menu layout Every Setup Tool menu consists of three parts (see Figure 4-3, page 80 ):
The menu line contains a navigation aid to show you where you currently are in
the Setup Tool menu system. The system name of X4000 is also displayed.
This is especially helpful if you are using several BinTec routers with different
system names.
The configuration window is where the actual entries are made and the
respective settings displayed. The field in which the cursor is currently located
is also marked.
X4000 Setup Tool BinTec Communications AG
X4000
Licenses System
LAN: CM-100BT, Fast Ethernet Module:
WAN: CM-1BRI, ISDN S0
Serial-WAN: CM-SERIAL, Serial
WAN PArtner
IP IPX PPP ISDN CAPI
Configuration Management
Monitoring and Debugging
Exit
Press <Crtl-n>,<Ctrl-p> to scroll through menu items,<Return> to enter
Menu Line
Configuration Window
Help Line
To use the Setup Tool, you must log in with the user name
admin
! If you don’t
know the corresponding password, you cannot open the Setup Tool (see
chapter 4.2, page 76 ).