BinTec X4000 User Manual Download Page 28

Page: 28 / 498

X4000

User’s Guide

Welcome!

To help you find and interpret the information in this manual, the following

typographical elements are used:

Table 1-3: Typographical elements

Typographical element

Meaning

➤

Here you are requested to do something.

■

–

Lists including two levels.

ENU

➧

UBMENU

Indicates menus and submenus in the Setup
Tool.

Non-proportional

(Courier), e.g.

ping 192.168.1.254

■

Indicates commands (e.g. in the SNMP

shell) that you must enter as shown.

■

Used to display the Setup Tool.

Indicates inputs in which you enter a value for
the term shown in the brackets. Do not enter
the pointed brackets.

bold, italics, e.g.

BigBoss

Indicates example terms.

bold, e.g.

➤➤

MIB

Indicates terms that you can find in the glossary
(for online texts, click the double arrow).

bold, e.g.

biboAdmLoginTable,

Windows Start menu

■

Indicates fields in the Setup Tool and MIB

tables and variables.

■

Indicates keys/key combinations and

Windows terms.

italics, e.g.

none

Indicates values that can be entered or set in
the Setup Tool or MIB variables.

Summary of Contents for X4000


















































































































































































































































































































































































































































































































Search results

Summary of Contents for X4000

Reviews:

Related manuals for X4000

Brands by name

Popular brands

BinTec X4000, User Manual

Search results

Summary of Contents for X4000

Reviews:

Related manuals for X4000

Brands by name

Popular brands