BinTec X4000, User Manual

Page: 106 / 498

106 X4000 User’s Guide
Man-Machine Interface (MMI) – Display with User Guide
5
5.3.6 Monitoring
The main menu "Monitoring" offers a facility for monitoring the operating
temperature of X4000 :
Figure 5-9: Menus for monitoring X4000
■
Current Temperature
Displays the current operating temperature of X4000 in °C.
The current operating temperature is always indicated by a black bar.
Temp shows the temperature measured by a sensor in the basic unit,
Temp1 and Temp2 show the temperature measured on the expansion
card. A PRI expansion card is equipped with two temperature sensors and
a BRI or LAN expansion card with one sensor (Temp1).
The current maximum permissible temperature is 60 °C and is indicated by
a continuous line on the display. The maximum permissible temperature
can be changed by editing the MIB variable sysX4ConfigTempAlarmTrap
for the basic unit (Temp) and the MIB variables
sysX4ConfigTempAlarmTrapMod1 /
sysX4ConfigTempAlarmTrapMod2 for the expansion cards (Temp1 and
Temp2). If this temperature is exceeded, X4000 generates traps, which can
be evaluated over the network.
OK
. . l . . .
. . . . . l
l .
OK
OK
C
Current temperature
°C 40 50 60
Temp
Temp1
Temp2
Monitoring