BinTec X4000, User Manual

Page: 203 / 498

X4000 User’s Guide 203
Settings Specific to WAN Partners
8
Field Meaning
Mode Defines which mode is used for BOD. Possible
values: see
Table 8-12, page 205 .
Line Utilization
Weighting Defines how the line utilization is calculated.
Possible values:
■
equal: All the measured values of
throughput in Line Utilization Sample
(sec) are weighted equally for the
calculation (default value).
■
proportional: The last measured values of
throughput are weighted more heavily for
the calculation, i.e. the calculation is most
heavily influenced by the last measured
values in Line Utilization Sample (sec).
Line Utilization Sample
(sec) Time interval in seconds. Throughput
measurements in Line Utilization Sample
(sec) are included in the calculation of the line
utilization. Possible values:
5 to 300 (default
value: 5).
Gear Up Threshold Utilization threshold at which another B-
channel is added for a connection.
Gear Down Threshold B-channels are dropped until the remaining
channels have at least the percentage
utilization degree remaining here.
D-Channel Queue
Length (only if Layer 1 Protocol = AO/DI in the menu
WAN P
ARTNER
➧
E
DIT
➧
A
DVANCED
S
ETTINGS
)
Threshold value for the number of bytes
accumulated in the D-channel at which the
system is to change to the B-Channel Mode
(see
chapter 8.2.4, page 206 ).