BinTec X4000, User Manual

Page: 192 / 498

192 X4000 User’s Guide
Advanced Configuration of the Basic Unit with the Setup Tool
8
Table 8-5: CM-1BRI, ISDN S0
➧
I
NCOMING
C
ALL
A
NSWERING
To do Proceed as follows:
➤
Go to CAPI
➧
U
SER
.
➤
Select an existing entry and confirm it with Return or add a new entry with
ADD.
➤
Enter Name.
Field Meaning
Item Service which is to accept a call to the Number
below.
Number Phone number under which the service (Item)
entered above can be reached.
Mode Mode in which X4000 compares the digits of
Number with the called party number of the
incoming call:
right to left: default mode.
left to right (DDI): always select this mode if
X4000 is connected to a point-to-point ISDN
access (system access).
User name Corresponds to Name in CAPI
➧
U
SER
. User
to whom an incoming call to the CAPI service
under Number is to be passed.
Bearer Type of incoming call. Possible values:
■
data: data call
■
voice: voice call
■
any: random call
When on starting X4000 in
CAPI
➧
U
SER
there is no entry, automatically a
standard entry is created without password (with Name = default and CAPI =
enabled).