BinTec X4000, User Manual

Page: 285 / 498

X4000 User’s Guide 285
WAN Interface Card for ISDN PRI and/or G.703
9
Incoming Call
Answering
If dialup connections are to be set up over the ISDN PRI/G.703 interface, first
tell X4000 how it is to respond to incoming calls over this interface (these
settings are not necessary for a leased line):
➤
Go to
X4E-2PRI, ISDN S2M
➧
U
NIT
0
➧
I
NCOMING
C
ALL
A
NSWERING
.
This menu lists the previously completed assignment of systems to
numbers. The menu offers the same options as
CM-1BRI, ISDN S0
➧
I
NCOMING
C
ALL
A
NSWERING
for distribution of incoming calls over the ISDN
BRI interface of the basic unit. For a detailed description, see "Incoming call
answering", page 141 .
➤
Use ADD to add a new entry or select an existing entry. Confirm with
Return to change the entry.
➤
Select the Item, e.g.
PPP (routing).
➤
Enter the Number, e.g. 091112330.
➤
Select the Mode, e.g. right to left.
➤
Select the Bearer, e.g. data.
➤
Press SAVE.
You have returned to menu X4E-2PRI, ISDN S2M
➧
U
NIT
0
➧
I
NCOMING
C
ALL
A
NSWERING
. The entries are saved and displayed in the list.
You have now assigned a possible service ( PPP (routing)) to one of your
numbers ( 0911 123 30). This means that when a data call is received for
Called Party Number 0911 123 30, it is put through to the PPP (routing)
service.
➤
Repeat these steps until you have assigned to all phone numbers the
services to be reached under these numbers.
You have now configured Incoming Call Answering for this ISDN PRI
interface and
X4000 distributes the incoming calls to the internal services.
➤
Leave X4E-2PRI, ISDN S2M
➧
U
NIT
0
➧
I
NCOMING
C
ALL
A
NSWERING
with EXIT.
➤
Press SAVE.
➤
If applicable, go to X4E-2PRI, ISDN S2M
➧
U
NIT
1 to configure the second
ISDN PRI/G.703 interface.