BinTec X4000, User Manual

Page: 278 / 498

278 X4000 User’s Guide
Configuration of Expansion and Resource Cards with the Setup Tool
9
9.1 WAN Interface Card for ISDN BRI
By installing a BRI (Basic Rate Interface) expansion card, you can equip X4000
with up to three additional ISDN BRI interfaces. You can use these interfaces
for both dialup and leased lines over ISDN.
The ISDN BRI expansion card can be equipped with a resource card with digital
modems (see chapter 9.4, page 295 ) and/or with a resource card for encryption
and compression (see chapter 9.5, page 306 ).
9.1.1 Configuration with the Setup Tool
The additional interfaces are shown in the Setup Tool main menu under
Module:
as follows:
The interface(s) are configured in the following menus:
■
X4E-3BRI, ISDN S0
➧
U
NIT
0 for the first additional ISDN BRI port
■
X4E-3BRI, ISDN S0
➧
U
NIT
1 for the second additional ISDN BRI port
■
X4E-3BRI, ISDN S0
➧
U
NIT
2 for the third additional ISDN BRI port
X4000 Setup Tool BinTec Communications AG
MyRouter
Licenses System
LAN: CM-100BT,Fast Ethernet Module: X4E-3BRI,ISDN S0
WAN: CM-1BRI,ISDN S0
Serial WAN: CM-SERIAL,Serial
WAN Partner
IP
IPX PPP MODEM ISDN CAPI
Configuration Management
Monitoring and Debugging
Exit