BinTec X4000, User Manual

Page: 143 / 498

X4000 User’s Guide 143
Configuring WAN Interfaces
7
If your ISDN connection has more than three extensions, a practical allocation
could look as follows:
Table 7-7: Distribution of extensions to services
Now set the entries for Incoming Call Answering:
➤
Go to CM-1BRI, ISDN S0
➧
I
NCOMING
C
ALL
A
NSWERING
:
Called party
number
Data services Voice services
10 PPP (routing)
11 CAPI CAPI
12 ISDN Login
If no entry is specified in the following menu, every incoming ISDN call is
accepted by the ISDN Login service. To avoid this, be sure to make the
necessary entries here.
As soon as you have made one or more entries in this menu, the matching
incoming calls are distributed to the corresponding services.
In the unconfigured ex works state, a user with the user name “default” and no
password is always entered for the CAPI subsystem. All calls to the CAPI are
offered to all CAPI applications in the LAN.
To distribute incoming calls for the CAPI subsystem to defined users with
password, you should use BinTec’s User Concept (see
chapter 8.1.2,
page 190 ). You should then delete the user "default" without password.
All incoming calls that do not match an entry are passed on to the CAPI
service.