BinTec X4000, User Manual

Page: 73 / 498

X4000 User’s Guide 73
Connection Methods
4
4.1.3 Connecting Over a LAN
To do
➤
Connect X4000 to the LAN.
Assigning IP
addresses
To assign your X4000 an IP address (if necessary) with the DIME Tools
program, proceed as follows:
➤
Click the Windows Start button and then P
ROGRAMS
➧
BRICK
WARE
➧
DIME Tools.
➤
If the
➤➤
BootP server is not started as standard, you must start it.
The BootP server window will appear after a short time if X4000 is still
unconfigured.
➤
Enter the name and IP address of your X4000 in the window under BRICK
Parameter.
➤
Click OK.
➤
Close DIME Tools.
Running telnet Now establish a connection to X4000 with telnet:
Windows
➤
Click the Windows Start button and then Run....
➤
Type
telnet <IP address of
X4000
>
.
You can reach X4000 from the LAN over the
➤➤
telnet service. Telnet is
normally available on every PC. To be able to reach your X4000 over the LAN,
it should already have an
➤➤
IP address and
➤➤
netmask . If this is not
the case and X4000 has therefore not yet been configured, you have two
options:
■
Enter the IP address and netmask via the input keys of the MMI (see
chapter 5, page 93 ).
■
If you are using Windows, you can assign X4000 an IP address by using the
➤➤
DIME Tools assistant. If you have not yet installed DIME Tools
together with BRICKware for Windows, proceed as explained in
chapter 6.2, page 112 .