BinTec X4000, User Manual

Page: 417 / 498

X4000 User’s Guide 417
SNMP Shell Commands
14
Entering
date YYMMDDHHMMSS
sets the clock to the corresponding value
(year, month, day, hour, minute, second).
t
t [<seconds>]
Is used to define the auto logout time for the current login session (a connection
to X4000 over telnet, isdnlogin or serial interface is normally disconnected
automatically if no entry is made on the keyboard for 15 minutes).
–
seconds
: auto logout is activated after
seconds
. Entering
t 0
deactivates auto logout.
nslookup
nslookup [-an] [-t <type>] [-w <sec>] [-r <ret>] ipaddr |
name [<server>]
Is used to check how a name or an IP address is resolved by X4000 or another
name server.
–
-a
: displays all the data received.
–
-n
: prevents the resolution of the indicated name server address
(without this option, an attempt is made to resolve the address of the
name server).
–
-t <type>
: executes <type> requests. Possible values for type: 0, A,
NS, MD, MF, CNAME, SOA, MB, MG, MR, NULL, WKS, PTR, HINFO,
MINFO, MX, TXT, ANY or any decimal number.
–
-w <sec>
: wait <sec> before sending a new request (default value: 3).
– -
r <ret>
: send a request maximum <ret> times (default value: 5).
–
ipaddr
: IP address to be resolved.
–
name
: name to be resolved.
–
<server>
: IP address of the name server that is to be asked for
(default value: 127.0.0.1). An attempt is made to have this name server
address resolved by the local DNS proxy.