BinTec X4000 User Manual Download Page 29

Page: 29 / 498

X4000

User’s Guide

Feedback

1.8

Feedback

As the BinTec Communications AG documentation team, we write manuals and

other documentation for your use. We aim to supply documentation that is up to

the high quality of

X4000

and meets your requirements. You as the user of

BinTec products are the best person to judge whether we have succeeded with

this manual.

So please let us know what is missing in this manual, what you don’t like, what

we should do better, what you like, what you think is especially successful, etc.

Your constructive criticism is always welcome and will help us design the

documentation for BinTec products to suit your wishes and needs.

Questionnaire

The last page of this manual contains a questionnaire we have prepared for

your suggestions. Please fill out the questionnaire and return

■

by fax to: +49 911 - 9673 1498

■

by post to:

BinTec Communications AG

Keyword: Docu Feedback

Südwestpark 94

90449 Nürnberg

■

or just send us an e-mail to:

[email protected]

We look forward to receiving your feedback. Thanks for your support.

Summary of Contents for X4000


















































































































































































































































































































































































































































































































Search results

Summary of Contents for X4000

Reviews:

Related manuals for X4000

Brands by name

Popular brands

BinTec X4000, User Manual

Search results

Summary of Contents for X4000

Reviews:

Related manuals for X4000

Brands by name

Popular brands