BinTec X4000, User Manual

Page: 316 / 498

316 X4000 User’s Guide
Configuration of Security Functions and Firewall
10
➤
Select EXTENDED to display additional information. You can then change
the status of the interface under Operation and confirm the entry with
START OPERATION.
TCP/IP statistics Proceed as follows to display the statistics for connections to
➤➤
protocols
ICMP,
➤➤
IP , UDP and TCP:
➤
Go to M
ONITORING AND
D
EBUGGING
➧
TCP/IP.
The statistics for IP connections are displayed. You can find the meaning
of the MIB variables in the
MIB Reference .
➤
Select c to display statistical data for ICMP.
➤
Select i to display statistical data for IP.
➤
Select u to display statistical data for UDP.
➤
Select t to display statistical data for TCP.
10.1.3 Credits Based Accounting System
ISDN charges X4000 ’s Credits Based Accounting System enables you to control the costs
billed for ISDN charges for data connections. This means you can keep the
effects of possible configuration errors within limits. For example, the system
enables you to define the maximum number of connections allowed in a certain
period of time. You can make settings for each subsystem (
➤➤
PPP ,
➤➤
CAPI ,
➤➤
ISDN Login ) to define the number of connections, the
connection time and the charges billed. If the defined limit is exceeded, X4000
X4000 Setup Tool BinTec Communications AG
[MONITOR][IP]: IP Statistics MyRouter
InReceives 3912 OutNoRoutes 0
InHdrErrors 0 ReasmTimeout 500
InAddrErrors 0 ReasmReqds 0
ForwDatagrams 0 ReasmOKs 0
InUnknownProtos 0 ReasmFails 0
InDiscards 0 FragOKs 0
InDelivers 3321 FragFails 0
OutRequests 9 FragCreates 0
OutDiscards 0 RoutingDiscards 0
EXIT
I(C)MP (I)P (U)DP (T)CP