BinTec X4000, User Manual

Page: 270 / 498

270 X4000 User’s Guide
Advanced Configuration of the Basic Unit with the Setup Tool
8
NetBIOS Broadcast Replication contains the following selection options:
Table 8-51: NetBIOS Broadcast Replication
To do Proceed as follows:
➤
Go to
IPX.
➤
Enter Local System Name.
➤
Enter Internal Network Number (only if necessary!).
➤
Activate Enable IPX Spoofing, if applicable.
➤
Activate Enable SPX Spoofing, if applicable.
➤
Select NetBIOS Broadcast Replication, e.g.
on LAN only.
➤
Press SAVE.
8.4.2 Configuring the LAN Interface
The next step is to configure X4000 ’s LAN interface to the IPX network. The
LAN interface is the physical interface to the local network. In the next menu,
you tell the router the network number of the IPX LAN to which it is connected.
As long as X4000 does not have this information, it cannot actively participate
in its own IPX LAN.
Possible values Meaning
yes All NetBIOS hosts in the network can access
each other, even if WAN connections must be
set up frequently.
Cost-intensive!
no (default value)
on LAN only
NetBIOS hosts in the LAN can only access
each other if they do not need WAN
connections to be set up.
Low cost.